10 Harmonic Balancer Pullers That Save Your Engine

If you wrench on older vehicles, you know the harmonic balancer can be a stubborn piece of hardware. A seized or worn damper can turn a simple repair into a battle, and using the wrong puller risks damaging the crankshaft or the balancer itself.

This guide breaks down ten reliable puller kits, from universal sets to GM-specific tools, so you can choose the one that fits your garage and your engine. Whether you are swapping a balancer on a classic Chevy or a modern LS, you will find a tool that makes the job safer and faster.

DPTOOL Harmonic Balancer Puller Kit – Universal Fit

This DPTOOL kit is a complete solution for removing and installing balancers, with a range of metric and standard bolts including M16, M14, M12, and several SAE sizes. The black screws in various lengths give you flexibility for different engine layouts, making it a versatile addition to your toolbox.

It works well for most applications, but note that it lacks an M12 x 1.75 bolt and is not for LT1 Gen 2 engines. If you work on a mix of older vehicles, this kit covers a lot of ground, though you may need to source a specific bolt for some GM models.

View all product features

• Profesional Replace Balancer Kit: This kit made you to removal and install balancer a breeze, very easy to use and a must-have tool if you're changing out a harmonic balancer. Made the job very quick and easy with no damage to any engine parts,the thrust bearing design on this model is nice, removal and installation of the balancer required minimal effort, went on/off evenly and smoothly
• Wide Application: Comes with a number of metric and standard bolts so it should work for most applications. Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set to remove worn or damaged harmonic balancers on any vehicle
• Specifications: M16 x 2.0, M14 x 1.5, M12 x 1.5, 3/4-16, 5/8-18, 9/16-18, 1/2-20, 7/16-20; Black screws M10 x 1.5 x 35mm, M8 x 1.25 x 45mm, M8 x 1.25 x 65mm, M8 x 1.25 x 90mm; Silver screws UNC 3/8” x 2”, UNC 5/16” x 6”, UNC 5/16” x 3-1/2”, UNF 5/16” x 3”, UNF 3/8” x 1-1/2”, UNF 1/4" x 2-1/2”, UNC 3/8” x 3”, UNC 3/8” x 4-1/2”, UNC 3/8” x 2”, please carefully check your car's specifications
• Tips: This kit not fit all the vehicle, not have M12 x 1.75 bolt , Not for LT1 Gen 2 engines, not fit 4.0L Chrysler engine (early 2000's Pacifica, 2008-2010 Chrysler T&C Limited or Dodge Grand Caravan)
• Sturdy: Harmonic balancer puller made of high quality heavy duty steel, has extremely strength and hardness, the surface has been coated with an anti-oxidation coating to prevent rust, so have long service life, and we offer 12 months warranty, we will refund or replace , if the tool have any quality problem

---

ReluxGo GM Harmonic Balancer Puller – LS Specific

This ReluxGo puller is built for GM vehicles, covering 5.3L, 5.7 LS1, 6.0 LS2, 6.2 LS3, and 7.0L engines, plus many Chrysler, Jeep, and Dodge V6 and V8 options. The clip-in design allows for quick removal and installation without needing tapped holes, which is a huge time-saver on modern GM engines.

Made from heat-treated AISI 1045 medium carbon steel, it is sturdy and corrosion-resistant. Keep in mind it does not fit 1997 or earlier GM LT engines like the 5.7L LT1, so if you have an older LT, this is not the tool for you.

View all product features

• USEFUL TOOL: This GM harmonic balancer puller can help you quickly and easily remove or install harmonic balancers without tapped holes found on many GM vehicles; The clip in design offers a strong grip without bolting into the balancer.
• WIDE APPLICATION: This harmonic damper puller is compatible with GM Vehicles 5.3 L, 5.7 LS1, 6.0 LS2, 6.2 LS3, and 7.0 L; CHRYSLER, JEEP, DODGE: 3.5 L V6, 3.6 L V6, 4.7 L V8, 5.7 L V8, 6.1 L, and V8.
• TIPS: Don't fits 1997 or earlier GM LT (5.7L LT1<4) series engines (with threaded holes), and does not apply to 2018+ Ford 5.0 engines and newer Coyote balancers. Also will not work with the truck pulley.
• PREMIUM MATERIAL: This pulley puller is made of high hardness AISI 1045 medium carbon steel, heat-treated, sturdy and steady, corrosion resistant, wear resistant, with reliable use and long service life.
• AFTER-SALES DESCRIPTION:If you have any questions about the purchased tool, please contact us in time, and your pro

---

Orion Motor Tech 49-Piece Puller Set – All-in-One

This Orion Motor Tech kit is a comprehensive 49-piece set that handles harmonic balancers, gear pulleys, steering wheels, and crankshaft pulleys. It includes a steel yoke, pressure screw, three adaptors, and 30 bolts in common SAE and metric sizes, so you are covered for a wide range of vehicles.

The AISI 1045 medium carbon steel construction, with heat-treated and anodized adaptors, ensures durability. The well-designed yoke and pressure screw minimize scratching, which is a nice touch when working on a clean engine. This is a great all-around kit for a home mechanic.

View all product features

• GEAR PULLER SET: This Orion Motor Tech tool kit removes universal harmonic balancers, gear pulleys, steering wheels, crankshaft pulleys, and more for easy automotive repair and maintenance
• COMPLETE 49-PIECE SET: This gear puller kit includes a steel yoke, a pressure screw, 3 adaptors, and 30 bolts in the most needful SAE and metric sizes—1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, M8x1.25, and M10x1.5—to suit your different needs; the 4-slot yoke also allows you to use it for two or three-slot operation with ease
• DURABLE PERFORMANCE: Each of these crank puller tools is constructed from hardened AISI 1045 medium carbon steel while the centering adaptors are further heat-treated and anodized for the necessary strength to get your work done right; all metric bolts are blackened and all SAE bolts are chrome-plated for easy identification, offering you years of outstanding dependability and superior corrosion-resistant service
• SCRATCH-FREE OPERATION: Thanks to the well-designed yoke, pressure screw, and washers, pressure is evenly distributed to pulleys for safe and worry-free servicing
• WIDE COMPATIBILITY: Including stepped bolts for 1990 and newer GM 3300-3800 V6 crankshaft pulleys, this harmonic balancer tool kit works on most cars, pickups, and SUVs in the market

---

Orion Motor Tech Balancer Puller – Quick Removal

This Orion Motor Tech kit is designed for quick removal of pressed-on balancers using a single center retainer bolt. The 3-jaw puller provides a firm grip, and the push bolt fits 24 mm hex and 3/8-inch square drive tools, making it easy to apply even pressure.

It is compatible with a wide range of domestic and import vehicles, including Cadillacs since 1988 and many Chrysler models. The structural-grade steel construction ensures it can handle tough jobs without bending. If you need a straightforward puller for common balancers, this is a dependable option.

View all product features

• QUICK BALANCER REMOVAL: This harmonic balancer puller kit by Orion Motor Tech is specifically designed for quick removal of pressed-on balancers with a single center retainer bolt; with this engine repair tool there's no need to disassemble the radiator, saving you a huge chunk of time
• SAFE & EASY OPERATION: This mechanic tool set includes a 3-jaw puller for a firm and secure grip, a push bolt fitted for 24 mm hex drive and 3/8" square drive tools that easily centers up to drive the rods, and 4 forcing rods (4", 5.4", 6.2", 7.5") to keep your work fast and efficient
• WIDE COMPATIBILITY: Our harmonic damper pulley puller set works for dampers and balancers in a wide range of domestic and import vehicles, compatible with Cadillacs since 1988, Chevrolet trucks since 2003, 1990 Chryslers, Fords since 1995, GM Generation II engines, the 1995 Mitsubishi Eclipse, and more!
• DURABLE CONSTRUCTION: Each part in this professional tool kit is made from structural-grade AISI 1045 medium carbon steel for superior strength with a cataphoretic electro-coating for corrosion-resistant durability and longevity
• CONVENIENT STORAGE CASE: This puller set comes with a rugged blow-molded case, keeping everything organized and easy to store or transport between jobs

---

OEMTOOLS Adjustable 3-Jaw Puller – Flexible Fit

This OEMTOOLS kit features an adjustable 3-jaw design with spring-loaded jaws that hold legs securely, making setup faster and more accurate. It is compatible with GM, Ford, Chrysler, and Mitsubishi vehicles, and works well in tight engine compartments without removing the radiator.

You get four forcing rods in different lengths (4, 5-13/32, 6-1/2, and 7-13/32 inches) to handle various engine setups. This kit works as a crankshaft pulley removal tool too, adding to its versatility. It is a practical choice for older vehicles where space is limited.

View all product features

• Versatile Vehicle Compatibility: Designed for use with GM, Ford, Chrysler, and Mitsubishi vehicles, this harmonic balancer installer handles tight engine compartments without removing the radiator
• Spring-Loaded Jaw Precision: Spring-loaded jaws securely hold legs in place, making it easier to position the pulley puller accurately and reducing setup time for efficient harmonic balancer removal
• Multiple Forcing Rods Included: Harmonic balancer puller kit includes four forcing rods (4", 5-13/32", 6-1/2", 7-13/32") for versatile use across different engine setups, ensuring the right fit for various applications
• Engine Damper Kit: This kit works seamlessly as a crankshaft pulley removal tool, making it ideal for removing engine dampers and crank pulleys with precision and ease
• Durable, Portable Storage Case: Comes with a sturdy, organized case, making it easy to transport and store your pulley puller set, ensuring your tools are always protected and ready to use

---

GEAROLL Harmonic Balancer Puller – 6-Jaw Upgrade

This GEAROLL kit is an upgraded version with six jaws: three thicker ones for older vehicle models and three thinner ones for the newest models. That means you can handle a broader range of balancers without switching tools. It is compatible with GM 5.7L V8, GM 2000 and newer 4.8L, 5.3L, 5.7L, 6.0L, 8.1L V8, and Cadillac 4.5L, 4.6L, and 4.9L V8 engines.

The kit is designed for quick removal of pressed-on balancers with a single center retainer bolt, and the high-hardness steel construction provides extra strength. If you work on both classic and modern GM vehicles, this dual-jaw set is a smart investment.

View all product features

• WIDE APPLICATIONS: This harmonic balancer puller is compatible for GM 5.7L V8; GM 2000 and newer 4.8L, 5.3L, 5.7L, 6.0L, 8.1L V8; Cadillac 4.5L, 4.6L, and 4.9L V8; Compatible with Chevrolet Trucks (2003-) 4.2L I6, (2004-) 3.5L I5, (2005-) 2.8L I4; Compatible with Ford (1995-) V8 engines; Mitsubishi Eclipse (1995-) 2.0L DOHC non-turbo
• UPGRADED VERSION:Our harmonic balancer puller/installer set has 6 jaws, 3 thicker jaws to fit older vehicle models and 3 thinner jaws to fit the newest models; Fits most new and old models
• QUICK BALANCER REMOVAL: This harmonic balancer puller kit is specifically designed for quick removal of pressed-on balancers with a single center retainer bolt; with this engine repair tool there's no need to disassemble the radiator, saving you a huge chunk of time
• PREMIUM QUALITY MATERIAL: Manufacture by high hardness steel provides extra strength and longevity with a black oxide finish for corrosion resistance
• PACKAGE INCLUDES: 1 x 3-jaw puller, another 3-jaw can be replaced, 4 x forcing rods, 1 x harmonic balancer holder, 1 x gloves, 1 x storage case; Dimension: 3/8" drive forcing screw-90 mm; 4 x forcing rods-100 mm, 135 mm, 165 mm, 185 mm

---

ReluxGo 3-Jaw Puller Set – Compact and Strong

This ReluxGo set includes a 3-jaw puller, a forcing screw for 24 mm drive tools, and four forcing rods in sizes from 3-7/8 to 6-1/2 inches. It is designed for tight engine compartments, letting you remove damper pulleys without taking out the radiator, which is a big plus on older vehicles.

It is compatible with GM 2000 Generation II Cadillacs, Chevrolet trucks from 2003, Chrysler from 1990, and Ford from 1995. The AISI 1045 medium carbon steel construction ensures durability. This is a solid, no-frills puller for common applications.

View all product features

• PRODUCT SIZE: This harmonic balancer puller kit has a 3-jaw puller for a firm and secure grab, a forcing screw fitted for 24 mm drive tools, and 4 forcing rods (3-7/8", 5-1/5", 6-1/3", 7-3/5") to satisfy your needs.
• EASY TO USE: This 5 PCS harmonic balancer puller set is an ideal tool for removing damper pulleys in tight engine compartments without removing the radiator. Use 3 jaw puller arms with significant bite to grab and a forcing screw easily centers up to drive the rods. Easy and efficient.
• WIDE APPLICATION: This 3-jaw pulley puller set is compatible with Model GM 2000 Generation II Cadillac (1988 – Newer), Chevrolet Trucks (2003 – Newer), Chrysler (1990), Ford (1995 – Newer), and Mitsubishi Eclipse (1995), and more.
• PREMIUM MATERIAL: This harmonic balancer puller is made of high hardness AISI 1045 medium carbon steel, heat-treated, sturdy and steady, phosphating and black coloring, corrosion resistant, wear resistant, with reliable use and long service life.
• KIT INCLUDES: This harmonic balancer pulley removal tool includes 1 x 3-jaw puller, 4 x forcing rods(3-7/8", 5-1/5", 6-1/3", 7-3/5"), 1 x forcing screw, 1 x gloves, 1 x storage case.

---

Orion Motor Tech Balancer Puller – 19mm Hex Drive

This Orion Motor Tech kit is similar to the other OMT puller but features a push bolt fitted for 19 mm hex and 3/8-inch square drive tools, which may be more convenient for some users. It is designed for quick removal of pressed-on balancers with a single center retainer bolt.

It works with a wide range of domestic and import vehicles, including Cadillacs since 1988 and many Chrysler models. The structural-grade steel construction ensures it can handle tough jobs. If you prefer a smaller hex drive, this is a good option.

View all product features

• a. QUICK BALANCER REMOVAL: This harmonic balancer puller kit by Orion Motor Tech is specifically designed for quick removal of pressed-on balancers with a single center retainer bolt; with this engine repair tool there's no need to disassemble the radiator, saving you a huge chunk of time
• b. SAFE & EASY OPERATION: This mechanic tool set includes a 3-jaw puller for a firm and secure grip, a push bolt fitted for 19 mm hex drive and 3/8" square drive tools that easily centers up to drive the rods, and 4 forcing rods (4", 5.4", 6.2", 7.5") to keep your work fast and efficient
• c. WIDE COMPATIBILITY: Our harmonic damper pulley puller set works for dampers and balancers in a wide range of domestic and import vehicles, compatible with Cadillacs since 1988, Chevrolet trucks since 2003, 1990 Chryslers, Fords since 1995, GM Generation II engines, the 1995 Mitsubishi Eclipse, and more!
• d. DURABLE CONSTRUCTION: Each part in this professional tool kit is made from structural-grade AISI 1045 medium carbon steel for superior strength with a cataphoretic electro-coating for corrosion-resistant durability and longevity
• e. CONVENIENT STORAGE CASE: This puller set comes with a rugged blow-molded case, keeping everything organized and easy to store or transport between jobs

---

Thorstone 46-Piece Puller Set – Budget Friendly

This Thorstone set is a multifunctional kit that works on harmonic balancers, flywheels, crankshafts, steering wheels, and pulleys. It includes 30 different bolts and a four-yoke slot, so it can handle a range of jobs on most cars, trucks, SUVs, and small engine vehicles.

All components are made from heat-treated carbon steel with oxide finishes for rust resistance. The heavy-duty blow molded carrying case keeps everything organized. If you are on a budget but want a versatile puller, this is a great value.

View all product features

• MULTIFUNCTION – Allowing unit to be used with harmonic balancer, flywheel, crankshaft, steering wheel, pulley and other two or three hole applications
• HIGH-QUALITY – All components are crafted from heat treated carbon steel with oxide finishes, helping the tool withstand tough pulling jobs and resist rust
• COMPATILIBIYTY – Includes 30 different bolts and a four-yoke slot, can handle a range of jobs on most cars, trucks, SUVs and small engine vehicles
• PACKAGE – Comes with a heavy duty blow molded carrying case, for easy transportation, safe storage and quick organization
• 100% SALE SUPPORT -We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone

---

DPTOOL 6-Jaw Balancer Puller – Old and New

This DPTOOL kit is an upgraded version with six jaws: three thicker for older vehicles and three thinner for newer models, based on professional testing. It is compatible with GM 5.7L V8, GM 2000 and newer 4.8L, 5.3L, 5.7L, 6.0L, 8.1L V8, and Cadillac 4.5L, 4.6L, and 4.9L V8 engines, plus Chevrolet trucks from 2003.

It is designed for removing damper pulleys in tight engine compartments without removing the radiator, which is a common challenge. The high-quality steel construction ensures durability. If you work on a mix of old and new GM vehicles, this kit offers great flexibility.

View all product features

• Upgraded Version: Our harmonic damper pulley tool have 6 jaw, 3 thicker jaw fit old vehicle models, 3 thiner fit newest model, because professionally tested, we find 3 thicker jaw can't enter new model vehicle belt pulley, and we design 3 thin jaw to fit the new model. So this update version tool fit many vehicle model, includ newest model
• Application: GM 5.7L V8; GM 2000 and newer 4.8L, 5.3L, 5.7L, 6.0L, 8.1L V8;Cadillac 4.5L, 4.6L, and 4.9L V8; compatible with Chevrolet trucks (2003-) 4.2L I6, (2004-) 3.5L I5, (2005-) 2.8L I4; compatible with Ford (1995-) V8 engine; Mitsubishi Eclipse (1995 – ) 2.0L DOHC non-turbo
• Function: Designed for removing damper pulleys in tight engine compartments without removing the radiator. This pulley is hard to access and remove dute to space limitations in and around the engine compartment
• Quality Guarante: Our harmonic damper pulley tool made of high quality steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life, and we offer 12 month warranty
• Tips: if you try the 3-jaw puller is not fit you car, you need replace another 3 jaw

---

Buyer’s Guide: What to Consider

Choosing the right harmonic balancer puller depends on your vehicle, your workspace, and the tools you already own. Here are five key factors to weigh before you buy.

• Vehicle Compatibility: Check the puller's listed applications. Some kits are GM-specific, others cover Ford, Chrysler, and imports. Match to your engine family.
• Jaw Design: Three-jaw pullers are common, but six-jaw kits offer better grip on both old and new balancers. Consider your vehicle's age.
• Bolt and Adaptor Range: Ensure the kit includes the right bolt sizes for your balancer. Universal sets with many bolts are more flexible.
• Build Quality: Look for heat-treated steel or AISI 1045 carbon steel for durability. Avoid cheap alloys that can bend under pressure.
• Ease of Use: Features like spring-loaded jaws, single center bolts, and multiple forcing rods reduce setup time and make removal easier.

Conclusion

Selecting the best harmonic balancer puller for older vehicles comes down to matching the tool to your engine and your comfort level. Universal kits like the DPTOOL and Thorstone offer broad coverage, while GM-specific options like the ReluxGo and GEAROLL provide a precise fit for popular engine families.

For most DIYers, a six-jaw kit like the GEAROLL or DPTOOL gives the flexibility to handle both classic and modern balancers. If you only work on one type of vehicle, a dedicated puller may be all you need. Invest in a quality tool, and your next balancer replacement will be a smooth job.